You are here: Encyclopedia > C > Click and Countoff > Setting up a click with a non-percussion playback device

To setup a click with a non-percussion playback device

  1. Choose MIDI/Audio > MIDI Thru. The MIDI Thru dialog box appears.
  2. Click Smart and click OK.
  3. Choose MIDI/Audio > Device SetupMIDI Setup. The MIDI Setup dialog box appears.
  4. Click the Advanced button. The MIDI Setup dialog box expands.
  5. In the first MIDI IN slot (above Hide Advanced Settings), select the driver for your MIDI IN device (usually with MPU or MIDI IN in its name.)   
  6. In the first MIDI OUT slot (above Hide Advanced Settings), select the driver for your MIDI OUT device.      
  7. For the second MIDI OUT slot (below Hide Advanced Settings), select the driver for your computer speakers (often with the word Synth in its name.)    
  8. Set the base channel to 17. Click OK.   
  9. Click the HyperScribe tool image\HyperScribe_Tool.gif. The HyperScribe menu appears.
  10. Choose HyperScribe > Beat Source > Playback and/or Click.
  11. Click on the Click and Countoff button. The Click and Countoff dialog box appears. See To setup countoff measures and the metronome click (for Playback and HyperScribe Recording) above for more details.
  12. Enter 26 in the Note box for both Down Beats and Other Beats. Leave the other boxes in their default values.

 

 

User Manual Home